Click on any stream to learn more.
Inhibitor Dose Against a Known Volume
All quantities are live and update with your inputs.
Operating Conditions
- Loop
- 1,000 gal
- Inhibitor
- Nitrite
- Target
- 800 ppm NO₂
- Product
- 40% NaNO₂
- Density
- 10.5 lb/gal
- Makeup
- none
Key Results
Primary outputs and operational context based on your inputs.
800 ppm as NO₂ = 1,200 ppm as NaNO₂; the product is 40% NaNO₂ = 26.7% as NO₂.
Product to Add Pounds of active over the label's percent, then over the density: the gallons that get pumped.
2.4 gal
25.0 lb of product
Add 2.4 gal (25.0 lb) of product to raise nitrite from 0 to 800 ppm as NO₂.
Active Needed The mass balance's answer before any product exists, at 8.34 lb per gallon of water.
10.0 lb NaNO₂
6.7 lb as NO₂
1,000 gal × 8.34 × 1,200 ppm.
Basis Check The conversion actually applied between the kit's basis and the label's.
800 ppm NO₂
= 1,200 ppm NaNO₂
Product 40% NaNO₂ = 26.7% NO₂.
Maintenance Dose The target concentration fed into the makeup, day after day.
0 gal/day
no makeup entered
Enter a makeup or loss rate to price holding the target.
Loop Turnover How long the makeup takes to replace the whole loop. A leak meter.
none
a tight loop
A closed loop should never turn over; makeup is a leak meter.
Product Price Delivered price of the product per gallon.
$
per galDose Cost$47.65